Bertinotti critica il paradigma della crescita di Veltroni
Ieri sono stato al Consiglio Federale Nazionale dei Verdi, al quale è intervenuto per un saluto anche Bertinotti.
Due cose:
1) C’erano tutte le televisioni, da Sky alla Rai, ma nessuna ha trasmesso un secondo, che io sappia. L’accordo dei media per ignorare le alternative al duo Veltrusconi mi pare ormai evidente.
2) Finalmente un candidato premier che critica il paradigma della crescita senza se e senza “ma anche” ed il PIL come unico indicatore della qualità della vita. Finalmente un candidato premier che si sia fermato a riflettere del fatto che la Cina, a crescita >8%, non sia proprio un modello auspicabile per il futuro del nostro Paese.
Aggiornamento: qui trovate i video dell’intervento.
L’ospedale Morgagni-Pierantoni riduce le proprie emissioni
Ricevo dall’USL di Forlì un comunicato interessante che dimostra quanta CO2 stia risparmiando il nostro ospedale grazie ad interventi mirati di risparmio energetico ed ottimizzazione dei consumi: circa 1000 tonnellate l’anno in meno.
Un buon esempio, che a mio parere andrebbe seguito in tutti gli edifici pubblici, con mezzi chiaramente tarati all’esigenza. Complimenti.
L’ospedale “Morgagni-Pierantoni” di Forlì cura anche l’ambiente: da
luglio a settembre, ridotte di 350mila tonnellate le emissioni di anidride
carbonica grazie al contenimento dei consumi elettriciL’ospedale “Morgagni-Pierantoni” di Forlì non è attento solo ai bisogni
del paziente ma cerca anche di rispettare al massimo l’ambiente. Nel trimestre
luglio-settembre, grazie alle misure di razionalizzazione adottate dall’U.O.
Attività tecniche e patrimonio diretta da Vittorio Laghi, le emissioni in
atmosfera di andride carbonica del polo ospedaliero sono diminuite di 350mila
tonnellate. Un dato che, in proiezione annuale, può significare una riduzione
intorno alle mille tonnellate l’anno. Rispetto all’analogo periodo del 2006,
infatti, si assiste a un considerevole abbattimento del consumo di energia
elettrica, con un lusinghiero -13% nel mese di settembre. Peraltro, tale calo
riguarda in particolare la cabina deputata all’alimentazione delle centrali
tecnologiche, ovvero quella che più incide sui consumi totali.
«Abbiamo cercato di adattare i consumi ai bisogni, eleminando sprechi e
utilizzi superflui attraverso un’opera di ottimizzazione – illustra Vittorio
Laghi, direttore dell’U.O. Attività tecniche e patrimonio – in sostanza si
è trattato di ingegnerizzare i sistemi tecnologici, guidando al meglio i
machinari, così da farli lavorare secondo le necessità e nelle fasce di curva
in cui presentano un miglior rendimento». Input in questo senso sono venuti
anche dalla Regione, che ha varato un programma di attenzione al risparmio
energetico, coinvolgendo i responsabili delle singole aziende in tavoli di
confronto nell’ottica di una razionalizzazione diretta, nel lungo periodo, a
poter predisporre gli acquisti di energia a livello regionale.
A spingere l’Azienda verso la pianificazione di tali misure di contenimento
è stata poi la constatazione, nel corso del 2006, di un trend di incremento,
sia in termini di consumo che tariffari. In questa prima fase d’intervento, la
priorità è stata attribuita al contenimento dei consumi elettrici, con
aspettativa di sensibili effetti di risparmio anche nella produzione di energia
termica. Per raggiungere l’obiettivo, si è cercato di razionalizzare i
settori di maggior impatto sui consumi: dall’erogazione di acqua refrigerata
all’alimentazione elettrica.
«In merito alla distribuzione dell’acqua refrigerata – illustra Vittorio
Laghi – l’obiettivo è stato creare una sinergia fra produzione e
distribuzione del freddo, così da agire con reciproca proporzionalità. A tale
scopo, è stata adeguata la linea di distribuzione principale a portata
variabile per far lavorare le elettropompe con una differenza di temperatura
costante fra “mandata” e “ritorno”, assicurando comunque una
predeterminata pressione nel punto della rete più sfavorito». Ciò ha
consentito di creare un circuito di distribuzione generale a portata variabile,
direttamente proporzionale alla richiesta di acqua refrigerata dei vari circuiti
“a spillamento” all’interno del presidio ospedaliero. «Le sottostazioni
“a spillamento” – spiega Laghi – sono state dotate di una valvola a tre
vie motorizzata, che consente di prelevare dalla tubazione principale generale
solo l’acqua refrigerata strettamente necessaria al fabbisogno istantaneo del
fabbricato servito. Inoltre, sono state montate sonde di temperatura per il
monitoraggio dell’intero sistema».
Misure di razionalizzazione dei consumi hanno interessato anche le 9 sale
operatorie, con l’installazione di rilevatori di presenza che modificano
automaticamente lo stato di esercizio delle UTA (unità di trattamento
dell’aria) da ordinario a stand-by. «In quest’ultimo stato di funzionamento
la portata dell’aria si riduce al 20% circa dell’esercizio ordinario –
rivela il direttore – I risultati sono stati significativi: in una settimana
campione, dal 14 al 21 settembre, abbiamo constatato una riduzione di esercizio
intorno al 40%». Interventi analoghi sono stati effettuati anche in ambulatori,
studi medici, e mensa, attivando, attraverso il sistema di controllo e gestione
informatizzato, la chiusura dei circuiti aeraulici in orari festivi e notturni.
Pure in questo caso, si è registrata una riduzione del fabbisogno energetico di
circa il 40%. Nella torre di degenza, invece, è stata diminuita del 50%, in
orari notturni, la portata di quattro unità di trattamento dell’aria, con un
risparmio energetico del 20%.Contemporaneamente, sono partite le prime misure atte a ridurre il consumo di
acqua. A questo scopo sono stati acquistati 2mila inserti universali aeratori
riduttori di portata e mille regolatori di flusso per doccia: da prove a
campione si è accertato infatti che i primi riducono la portata del 25-30%, e i
secondi del 40-45%. Grazie alla loro installazione si stima di ottenere un
risparmio sull’ordine del 20%.Soddisfazione per i risultati raggiunti viene espressa dal direttore del
presidio ospedaliero Maria Grazia Stagni. «Siamo riusciti a ridurre
sensibilmente i consumi energetici senza incidere in alcun modo su quella che è
la normale attività dell’ospedale – commenta – gli interventi messi in
atto, infatti, non hanno apportato nessun cambiamento per i pazienti, né
riguardo alle ore di sala operatoria né all’utilizzo di acqua. Ciò dimostra
che si possono conseguire obiettivi rilevanti con misure immediatamente
applicabili e per di più prive di conseguenze per l’utenza: basta migliorare
l’efficienza del sistema, calibrando i consumi alle reali esigenze delle
strutture e abbattendo gli sprechi». Una politica, questa, che è diretta non
solo a razionalizzare e ottimizzare le risorse del polo ospedaliero, ma si
propone anche di sensibilizzare i singoli operatori sull’importanza del
risparmio energetico. «Se c’è attenzione all’ambiente sul luogo di lavoro,
è poi più facile applicare gli stessi accorgimenti all’interno della propria
abitazione – illustra Stagni – in questo senso, il piano di riduzione dei
consumi viene a ricopre pure un’importante funzione culturale».
D’altronde, l’attenzione all’impatto ambientale delle tecnologie è da
molto tempo una delle priorità dell’Azienda Usl di Forlì, come dimostra la
nuova navetta gratuita ecologica per il trasporto di persone dai parcheggi auto
fino all’ingresso dei padiglioni dell’Ospedale. Si tratta di un Fiat Ducato
alimentato a metano, omologato per 9 passeggeri, con aria condizionata,
portellone automatico laterale per la salita dei passeggeri e pedana posteriore
elettrica per i disabili
ORDINE DEL GIORNO Sul Piano Energetico Ambientale Comunale di Forlì
– Vista la delibera in adozione sul PIANO ENERGETICO AMBIENTALE COMUNALE ed in particolare il contenuto della scheda relativa alla promozione della diffusione di impianti solari termici negli edifici;
IL CONSIGLIO COMUNALE IMPEGNA
– la II^ Commissione a discutere dell’attuazione del Piano Energetico Ambientale anche attraverso l’adeguamento di tutti i regolamenti coinvolti, a partire dal regolamento edilizio;
SOLLECITA L’AMMINISTRAZIONE COMUNALE
– a promuovere sul territorio investimenti volti ad incrementare il risparmio energetico pubblico e privato, anche attraverso accordi con le banche ed i privati per la concessione di finanziamenti agevolati finalizzati agli adeguamenti strutturali degli edifici;
– a partecipare all’iniziativa “mi illumino di meno” promossa dalla trasmissione radiofonica CATERPILLAR (RADIO 2), dal Ministero dell’Ambiente e da quello delle Attività Produttive, riducendo a scopo dimostrativo i consumi energetici del COMUNE nella giornata del 16 Febbraio e promuovendo le azioni utili allo scopo sul territorio.
Firmato
Alessandro Ronchi (Gruppo Verdi, primo firmatario).
L’ordine del giorno è stato votato da tutta la maggioranza.
Linux on a Compaq 1600 XL HOWTO
This Notebook is fully linux compatible
Here is the specifics of that notebook:
CPU Genuine Intel Celeron Mendocino 466 Mhz (Bogomips 927.33
Memory 64 Mb (I use 8 of this for the videoram)
Floppy Unknown 1.44MB 3.5″
Hard Disk Fujitsu 6Gb ATAPI / IDE
DVD Rom Toshiba DVD-ROM SD-C2302 ATAPI/IDE
Modem Conexant HSP MicroModem 56K pci (Software Modem)
Monitor: XTFT 14″
Video Card Trident Microsystems Cyberblade (generic) Cyberblade i1 pci
Sound Card Via Technologies Inc. VT82C686 pci [Apollo Super Ac97/audio]
Touchpad Synaptic
Thanks to Harddrake for those informations :) ( you can download it at http://www.linux-mandrake.com/harddrake∞ )
Update (27-5-2002): I’ve corrected the Mouse cursor problem with Linux in a Compaq Presario
Sometimes, when the memory is full and linux swaps on hard drive, the mouse cursor leave his correct position and the mouse clicks 1 cm left from the pointer. To correct that problem, insert the line Option “sw_cursor” in the Section “Device” of /etc/X11/XF68Config-4 configuration file. That corrects the problem. I’ve updated the configuration files.
Update: Now also the Conexant winmodem works correctly!
Thanks to Mark Hopkins for this wimodem help
You can find a driver at the location:
http://www.mbsi.ca/hsflinux/
I’ve tested it with Red Hat 7.2, and it works correctly. Because I don’t live on US, after the installation with the rpm of the driver I’ve launched that command:
# hsfconfig –country
And then Selected “Italy”. You can select here your different country.
See those urls to get more information:
http://www.linmodems.org
http://www.geocities.com/SiliconValley/3217/Documents/WinModems.html
http://www.o2.net/~gromitkc/winmodem.html
http://walbran.org/sean/linux/linmodem-howto.html
I’ve installed a Mandrake 7.2 , a Red Hat 7.1 and a Red Hat 7.2 distribution. They don’t recognize our graphic card, but the only thing you have to do is to replace the /etc/X11/XF86Config or /etc/X11/XF86Config-4 with the one provided in this page. (Read the files table). I use the touchpad or an external ps2 mouse, there’s no problem with the configuration.
If you want to use an external ps2 wheel mouse you must disable the gpm daemon on console, because it makes the mouse on console crazy and flipping. If you want to use the wheel, you must edit the section “imputdevice” as follow
Section “InputDevice”
Identifier “Mouse0”
# Modified by mouseconfig
Driver “mouse”
Option “Device” “/dev/mouse”
Option “Protocol” “IMPS/2”
Option “Emulate3Buttons” “no”
Option “ZAxisMapping” “4 5”
EndSection
This notebook has a confortable little display that shows the battery status, so I have not installed any dock to show the apm status in my desktop. Just run “apm” on a console if you want the % of charge.
And here is my configuration files:
Kernel Configuration (version 2.2.4-test11).
The soundcard works with the Via kernel driver, just do a modprobe to load the modules (Red Hat 7.2 does it automatically): .config
Xfree Configuration (for version 3.3.6)
It’s with italian keyboard, so if you want an other country map just modify the keyboard section and substitute the “it” with your keymap.
I used there 8 Mb for the videoram, setted from the bios. To use the mtrr acceleration, execute this command (after recompiling the kernel, with my .config file or with mtrr enabled):
echo “base=0xF5000000 size=8192k type=write-combining” >/proc/mtrr
XF86Config
Xfree Configuration (for version 4.*) (NEW)
The only way to make the new Xfree working with our laptop is to change first the /etc/lilo.conf file, adding a line with the VGA mode. If not, launching the Xfree server you will get working section of video, but not centered and moved on the right (if you can correct this error, send the solution to me). So change the lilo.conf file like this:
boot=/dev/hda
map=/boot/map
install=/boot/boot.b
vga=791 <-------- That line is fundamental
lba32
prompt
timeout=30
message=/boot/message
default=Windows
image=/boot/vmlinuz-2.4.2-2
label=linux
read-only
root=/dev/hda7
append="ide=ata66 idebus=66"
vga=788 <--------# That line is fundamental
image=/boot/vmlinuz-2.4.2-2 <----- this section is the same
# that above, but without the vga line. Add it to be
#sure when you will
#reboot to have at least one lilo image working.
label=linuxtext
read-only
root=/dev/hda7
append="idebus=66 ide0=ata66 ide0=dma hda=autotune ide0=autotune"
other=/dev/hda1 <--- this is not fundamental :)
optional
label=Windows Then you must be sure to use the Xfree 4 version. In modern distribution (like Mandrake 7.2, 8, Red Hat 7.1 and so on) you have the choice at the installation time. After that, you can change the Xfree version running on your machine by changing the /etc/X11/X simbolic link. If it brings to /usr/bin/X11/XFree86 then you're using the 4.* version. If it link to a /usr/bin/X11/XF86_* then you're using the 3.3.6 one. Just change that link to the one you want!!
So now you can put my configuration file XF86Config-4 in your /etc/X11 dir.
It's with italian keyboard, so if you want an other country map just modify the keyboard section and substitute the "it" with your keymap.
I used there 4 Mb for the videoram, setted from the bios. To use the mtrr acceleration, se the relative documentation in the kernel source tree.
Files
XF86Config (version 3)
# XF86Config auto-generated by XF86Setup
#
# Copyright (c) 1996 by The XFree86 Project, Inc. #
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
# # See 'man XF86Config' for info on the format of this file Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:-1"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
EndSection Section "ServerFlags"
EndSection Section "Keyboard"
Protocol "Standard"
AutoRepeat 250 30
LeftAlt Meta
RightAlt Meta
ScrollLock Compose
RightCtl Control
XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc105)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc105"
XkbLayout "it" # XkbSymbols "us(pc101)"
# XkbModel "pc101" #"pc104"
# XkbLayout "us" #"de"
# XkbVariant "nodeadkeys"
EndSection Section "Pointer"
Protocol "PS/2"
Device "/dev/psaux"
BaudRate 1200
Emulate3Timeout 50
EndSection Section "Monitor"
Identifier "Generic Multisync"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-64
VertRefresh 60-60
Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
EndSection Section "Device"
Identifier "Generic VGA"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
EndSection Section "Device"
Identifier "My Video Card"
VendorName "Unknown"
BoardName "Unknown"
Chipset "cyberblade"
EndSection Section "Screen"
Driver "Accel"
Device "My Video Card"
Monitor "Generic Multisync"
DefaultColorDepth 32
BlankTime 0
SuspendTime 0
OffTime 0
SubSection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768"
EndSubSection
EndSection Section "Screen"
Driver "SVGA"
Device "My Video Card"
Monitor "Generic Multisync"
DefaultColorDepth 32
BlankTime 0
SuspendTime 0
OffTime 0
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768"
EndSubSection
EndSection Section "Screen"
Driver "VGA16"
Device "Generic VGA"
Monitor "Generic Multisync"
BlankTime 0
SuspendTime 0
OffTime 0
SubSection "Display"
Depth 4
Modes "1024x768"
ViewPort 0 0
EndSubSection
EndSection Section "Screen"
Driver "VGA2"
Device "Generic VGA"
Monitor "Generic Multisync"
BlankTime 0
SuspendTime 0
OffTime 0
SubSection "Display"
Depth 1
Modes "1024x768"
ViewPort 0 0
EndSubSection
EndSection XF86Config-4
# XFree86 4.0 configuration generated by Xconfigurator
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# By default, Red Hat Linux 6.0 and later use xfs
Section "Files"
FontPath "unix/:7100"
EndSection
# Module loading section
Section "Module"
Load "dbe" # Double-buffering
Load "GLcore" # OpenGL support
Load "dri" # Direct rendering infrastructure
Load "glx" # OpenGL X protocol interface
Load "extmod" # Misc. required extensions
Load "v4l" # Video4Linux
# Load "pex5" # PHIGS for X 3D environment (obsolete)
# Load "record" # X event recorder
# Load "xie" # X Image Extension (obsolete)
# You only need the following two modules if you do not use xfs.
# Load "freetype" # TrueType font handler
# Load "type1" # Adobe Type 1 font handler
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Mouse0"
# Modified by mouseconfig
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "CustomConfiguration"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 31.5-57
VertRefresh 50-90
Option "dpms"
EndSection
Section "Device"
Identifier "My Video Card"
Driver "trident"
BoardName "Unknown"
# Use Option "nolinear" if the server doesn't start up correctly
# (this avoids the linear framebuffer probe). If that fails try
# option "nomemaccess".
#
# Refer to /usr/X11R6/lib/doc/README.S3, and the XF86_S3 man page.
EndSection
Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection
Section "Screen"
Identifier "Screen0"
Device "My Video Card"
Monitor "CustomConfiguration"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection XF86Config-4 Debian
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
# Load "xtt"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Trident Cyberblade i1"
Driver "trident"
VideoRam 8024
Option "sw_cursor"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-60
VertRefresh 50-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Trident Cyberblade i1"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
### END DEBCONF SECTION I'm working to use the special internet keys over the keyboard, so stay tuned!
Please email me anything you want to add or modify into this page.
Salviamo Monte Greco, nel Parco nazionale d’Abruzzo
I progetti per la costruzione di una serie di impianti e di piste da sci rischiano di compromettere gli ambienti più selvaggi e incontaminati del Parco nazionale d’Abruzzo, Lazio e Molise, la cui importanza naturalistica è riconosciuta in tutto il mondo.
Il progetto per la realizzazione di 7 impianti di risalita, di una nuova strada e di un parcheggio per tremila posti auto su Monte Greco andrà a stravolgere una delle più belle e solitarie montagne dell’Appennino, nella Zona di Protezione Esterna del Parco e al centro dell’areale dell’Orso bruno.
Per collegare le stazioni sciistiche di Pescasseroli, Scanno e Roccaraso si vogliono infatti realizzare nel cuore del Parco decine di chilometri di impianti con centinaia di piloni, strade di penetrazione con il taglio di migliaia di faggi secolari. Il tutto a circa 2.000 metri di quota, in un’area che ospita il secondo lago più alto dell’Appennino, il Lago Pantaniello.Cemento, piloni e sbancamenti sono incompatibili con la vita di lupi, orsi, aquile reali e di centinaia di specie di piante rarissime che solo nel Parco trovano rifugio. Un patrimonio unico di livello mondiale che non può essere svilito per il profitto di poche società private.
Il WWF sta raccogliendo firme per l’appello a non realizzare questo progetto, per lasciare intatta la montagna ed il suo enorme patrimonio faunistico: vi invito a sottoscriverlo. Finora sono state raccolte 10’000 firme, numero che certamente è destinato ad aumentare, grazie anche alle numerose iniziative promosse dall’associazione.
Sul sito del WWF Abruzzo è stato pubblicato, inoltre, un articolo che spiega nel dettaglio cosa si vuole realizzare, grazie anche a 4o miliardi di vecchie lire di finanziamento pubblico, ed i danni che questo progetto porterà all’ambiente circostante.