500

Eurozev: trasformare una vecchia 500 in veicolo elettrico

Il mitico Pietro Cambi è riuscito a trovare di nuovo spazio sul sito di Repubblica.it con il suo progetto di trasformazione di una vecchia 500 in una auto elettrica a zero emissioni.
Il retrofit elettrico, questo il nome dell’operazione, permetterebbe di riciclare un numero elevato di vetture e traformare un parco veicolare da rottamare in perfetti strumenti di mobilità cittadina.

Purtroppo la legge italiana ancora non consente l’immatricolazione, se non con un passaggio attraverso il TUV e la Germania, e l’emendamento a firma dei Verdi non è passato in Parlamento.
Complimenti ancora a Pietro ed alla sua associazione:
www.eurozev.org

Trasformare una vecchio cinquino in una efficientissima auto elettrica a zero emissioni? Niente di più facile. E basta fare qualche click nel sito www. eurozev. org, per avere anche un paio di consigli su come aggirare gli ostacoli che si frappongono alla sua omologazione e messa su strada.

Eurozev è infatti un’associazione senza scopo di lucro nata per promuovere la conversione dei veicoli con motori endotermici in veicoli elettrici, in modo particolare veicoli euro zero. Dopo tante battaglie – fra cui quella di sei mesi fa quando espose davanti a Montecitorio mentre si discuteva l’emendamento per la “liberalizzazione della conversione alla trazione elettrica dei veicoli circolanti”, una vecchia Cinquecento blu trasformata in un auto elettrica, – ha deciso di pubblicare sulle proprie pagine web una sorta di vademecum alla realizzazione dell’opera.

Smaltimento illecito di rifiuti pericolosi. In manette la famiglia Laghi

Forlì, ”Biodenaro”: smaltimento illecito di rifiuti pericolosi. In manette la famiglia Laghi

FORLI’ – Associazione per delinquere, finalizzata a traffico illecito di oltre 500 mila tonnellate di rifiuti, fittiziamente declassificati o illecitamente miscelati con altre tipologie di rifiuti, che venivano, poi, smaltiti in discariche non autorizzate dell’Emilia Romagna. In manette sono finiti Giacomo, Raffaele e Roberto Laghi, dell’omonima impresa. Ai domiciliari l’ex-rappresentante legale della società, Cesare Dall’Ara, e un tecnico di Hera.

Persi un sacco di commenti

Nel trasporto degli oltre 1500 articoli diversi commenti sono spariti, mangiati dal sistema antispam.
Purtroppo ripristinarli non è semplice, data la mole di dati, ed il controllo non può essere fatto automaticamente in maniera semplice. Se un vostro commento ad un mio articolo precedente è stato eliminato fatemelo sapere oppure reinseritelo, cercherò di sistemare il problema.

Week-end a Forlì

VENERDI’ 11 NOVEMBRE
MELDOLA – Alba Parietti “Nei panni di una bionda”

DESCRIZIONE: arà una vera e propria diva ad inaugurare la stagione 2005/2006 del Teatro Dragoni di Meldola. Alba Parietti sarà infatti la protagonista della commedia brillante Nei panni di una bionda, scritto da George Axelrod e diretto da Gino Zampieri. Sipario venerdì 11 novembre alle ore 21.
Data/Ora Inizio: 11/11/2005 – 21:00 Data/Ora finale: 11/11/2005 – 23:00
Luogo Evento: Teatro Dragoni
Città: Meldola
Sito web evento: www.accademiaperduta.it
Quota/ingresso: da 8 a 17 euro

SABATO 12 NOVEMBRE
FORLI’ – La civiltà delle buone maniere in Romagna tra ‘500 e ‘700

DESCRIZIONE: “Il Giovane ben creato”, di Bernardino Casali, fu nel XVI secolo il “Galateo” dell’azdor, il reggitore della famiglia mezzadrile. La docente universitaria Elide Casali ripercorre la storia e i contenuti di questo volume. A completare il programma culturale del pomeriggio, nel Salone dei Corali Rinascimentali sarà visitabile la mostra di antichi documenti e rarità bibliografiche curata da Piergiorgio Brigliadori, Antonella Imolesi, Ambra Raggi e Graziella Galeotti.

Data/Ora Inizio: 12/11/2005 – 16:30
Data/Ora finale: 12/11/2005 – 18:00
Luogo Evento: Biblioteca Comunale “Saffi”
Via: Corso della Repubblica, 72
Telefono: 0543/712600
Quota/ingresso: gratis

DOMENICA 13 NOVEMBRE
FORLI’ – Le Cartastorie

DESCRIZIONE: Rassegna domenicale di racconti per bambini e famiglie Elsinor teatro stabile di innovazione Regia Franco Palmieri

Data/Ora Inizio: 13/11/2005 – 16:00
Data/Ora finale: 13/11/2005 – 17:00
Luogo Evento: Teatro Giovanni Testori
Via: Via Vespucci 13
Telefono: 0543 722456
Sito web evento: www.elsinor.net
Quota/ingresso: € 6,00

Linux on a Compaq 1600 XL HOWTO

This Notebook is fully linux compatible

Here is the specifics of that notebook:

CPU Genuine Intel Celeron Mendocino 466 Mhz (Bogomips 927.33
Memory 64 Mb (I use 8 of this for the videoram)
Floppy Unknown 1.44MB 3.5″
Hard Disk Fujitsu 6Gb ATAPI / IDE
DVD Rom Toshiba DVD-ROM SD-C2302 ATAPI/IDE
Modem Conexant HSP MicroModem 56K pci (Software Modem)
Monitor: XTFT 14″
Video Card Trident Microsystems Cyberblade (generic) Cyberblade i1 pci
Sound Card Via Technologies Inc. VT82C686 pci [Apollo Super Ac97/audio]
Touchpad Synaptic

Thanks to Harddrake for those informations :) ( you can download it at http://www.linux-mandrake.com/harddrake∞ )
Update (27-5-2002): I’ve corrected the Mouse cursor problem with Linux in a Compaq Presario
Sometimes, when the memory is full and linux swaps on hard drive, the mouse cursor leave his correct position and the mouse clicks 1 cm left from the pointer. To correct that problem, insert the line Option “sw_cursor” in the Section “Device” of /etc/X11/XF68Config-4 configuration file. That corrects the problem. I’ve updated the configuration files.

Update: Now also the Conexant winmodem works correctly!
Thanks to Mark Hopkins for this wimodem help
You can find a driver at the location:
http://www.mbsi.ca/hsflinux/
I’ve tested it with Red Hat 7.2, and it works correctly. Because I don’t live on US, after the installation with the rpm of the driver I’ve launched that command:
# hsfconfig –country
And then Selected “Italy”. You can select here your different country.
See those urls to get more information:
http://www.linmodems.org
http://www.geocities.com/SiliconValley/3217/Documents/WinModems.html
http://www.o2.net/~gromitkc/winmodem.html
http://walbran.org/sean/linux/linmodem-howto.html

I’ve installed a Mandrake 7.2 , a Red Hat 7.1 and a Red Hat 7.2 distribution. They don’t recognize our graphic card, but the only thing you have to do is to replace the /etc/X11/XF86Config or /etc/X11/XF86Config-4 with the one provided in this page. (Read the files table). I use the touchpad or an external ps2 mouse, there’s no problem with the configuration.
If you want to use an external ps2 wheel mouse you must disable the gpm daemon on console, because it makes the mouse on console crazy and flipping. If you want to use the wheel, you must edit the section “imputdevice” as follow

Section “InputDevice”
Identifier “Mouse0”
# Modified by mouseconfig
Driver “mouse”
Option “Device” “/dev/mouse”
Option “Protocol” “IMPS/2”
Option “Emulate3Buttons” “no”
Option “ZAxisMapping” “4 5”
EndSection

This notebook has a confortable little display that shows the battery status, so I have not installed any dock to show the apm status in my desktop. Just run “apm” on a console if you want the % of charge.

And here is my configuration files:
Kernel Configuration (version 2.2.4-test11).
The soundcard works with the Via kernel driver, just do a modprobe to load the modules (Red Hat 7.2 does it automatically): .config

Xfree Configuration (for version 3.3.6)

It’s with italian keyboard, so if you want an other country map just modify the keyboard section and substitute the “it” with your keymap.

I used there 8 Mb for the videoram, setted from the bios. To use the mtrr acceleration, execute this command (after recompiling the kernel, with my .config file or with mtrr enabled):

echo “base=0xF5000000 size=8192k type=write-combining” >/proc/mtrr

XF86Config

Xfree Configuration (for version 4.*) (NEW)
The only way to make the new Xfree working with our laptop is to change first the /etc/lilo.conf file, adding a line with the VGA mode. If not, launching the Xfree server you will get working section of video, but not centered and moved on the right (if you can correct this error, send the solution to me). So change the lilo.conf file like this:

boot=/dev/hda
map=/boot/map
install=/boot/boot.b
vga=791 <-------- That line is fundamental lba32 prompt timeout=30 message=/boot/message default=Windows image=/boot/vmlinuz-2.4.2-2 label=linux read-only root=/dev/hda7 append="ide=ata66 idebus=66" vga=788 <--------# That line is fundamental image=/boot/vmlinuz-2.4.2-2 <----- this section is the same # that above, but without the vga line. Add it to be #sure when you will #reboot to have at least one lilo image working. label=linuxtext read-only root=/dev/hda7 append="idebus=66 ide0=ata66 ide0=dma hda=autotune ide0=autotune" other=/dev/hda1 <--- this is not fundamental :) optional label=Windows Then you must be sure to use the Xfree 4 version. In modern distribution (like Mandrake 7.2, 8, Red Hat 7.1 and so on) you have the choice at the installation time. After that, you can change the Xfree version running on your machine by changing the /etc/X11/X simbolic link. If it brings to /usr/bin/X11/XFree86 then you're using the 4.* version. If it link to a /usr/bin/X11/XF86_* then you're using the 3.3.6 one. Just change that link to the one you want!! So now you can put my configuration file XF86Config-4 in your /etc/X11 dir. It's with italian keyboard, so if you want an other country map just modify the keyboard section and substitute the "it" with your keymap. I used there 4 Mb for the videoram, setted from the bios. To use the mtrr acceleration, se the relative documentation in the kernel source tree. Files XF86Config (version 3) # XF86Config auto-generated by XF86Setup # # Copyright (c) 1996 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # See 'man XF86Config' for info on the format of this file Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:-1" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" EndSection Section "ServerFlags" EndSection Section "Keyboard" Protocol "Standard" AutoRepeat 250 30 LeftAlt Meta RightAlt Meta ScrollLock Compose RightCtl Control XkbKeycodes "xfree86" XkbTypes "default" XkbCompat "default" XkbSymbols "us(pc105)" XkbGeometry "pc" XkbRules "xfree86" XkbModel "pc105" XkbLayout "it" # XkbSymbols "us(pc101)" # XkbModel "pc101" #"pc104" # XkbLayout "us" #"de" # XkbVariant "nodeadkeys" EndSection Section "Pointer" Protocol "PS/2" Device "/dev/psaux" BaudRate 1200 Emulate3Timeout 50 EndSection Section "Monitor" Identifier "Generic Multisync" VendorName "Unknown" ModelName "Unknown" HorizSync 30-64 VertRefresh 60-60 Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync EndSection Section "Device" Identifier "Generic VGA" VendorName "Unknown" BoardName "Unknown" Chipset "generic" EndSection Section "Device" Identifier "My Video Card" VendorName "Unknown" BoardName "Unknown" Chipset "cyberblade" EndSection Section "Screen" Driver "Accel" Device "My Video Card" Monitor "Generic Multisync" DefaultColorDepth 32 BlankTime 0 SuspendTime 0 OffTime 0 SubSection "Display" Depth 8 Modes "1024x768" ViewPort 0 0 EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection SubSection "Display" Depth 32 Modes "1024x768" EndSubSection EndSection Section "Screen" Driver "SVGA" Device "My Video Card" Monitor "Generic Multisync" DefaultColorDepth 32 BlankTime 0 SuspendTime 0 OffTime 0 SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" ViewPort 0 0 EndSubSection SubSection "Display" Depth 32 Modes "1024x768" EndSubSection EndSection Section "Screen" Driver "VGA16" Device "Generic VGA" Monitor "Generic Multisync" BlankTime 0 SuspendTime 0 OffTime 0 SubSection "Display" Depth 4 Modes "1024x768" ViewPort 0 0 EndSubSection EndSection Section "Screen" Driver "VGA2" Device "Generic VGA" Monitor "Generic Multisync" BlankTime 0 SuspendTime 0 OffTime 0 SubSection "Display" Depth 1 Modes "1024x768" ViewPort 0 0 EndSubSection EndSection XF86Config-4 # XFree86 4.0 configuration generated by Xconfigurator Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection # By default, Red Hat Linux 6.0 and later use xfs Section "Files" FontPath "unix/:7100" EndSection # Module loading section Section "Module" Load "dbe" # Double-buffering Load "GLcore" # OpenGL support Load "dri" # Direct rendering infrastructure Load "glx" # OpenGL X protocol interface Load "extmod" # Misc. required extensions Load "v4l" # Video4Linux # Load "pex5" # PHIGS for X 3D environment (obsolete) # Load "record" # X event recorder # Load "xie" # X Image Extension (obsolete) # You only need the following two modules if you do not use xfs. # Load "freetype" # TrueType font handler # Load "type1" # Adobe Type 1 font handler EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbLayout" "it" EndSection Section "InputDevice" Identifier "Mouse0" # Modified by mouseconfig Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "PS/2" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "CustomConfiguration" VendorName "Unknown" ModelName "Unknown" HorizSync 31.5-57 VertRefresh 50-90 Option "dpms" EndSection Section "Device" Identifier "My Video Card" Driver "trident" BoardName "Unknown" # Use Option "nolinear" if the server doesn't start up correctly # (this avoids the linear framebuffer probe). If that fails try # option "nomemaccess". # # Refer to /usr/X11R6/lib/doc/README.S3, and the XF86_S3 man page. EndSection Section "Device" Identifier "Linux Frame Buffer" Driver "fbdev" BoardName "Unknown" EndSection Section "Screen" Identifier "Screen0" Device "My Video Card" Monitor "CustomConfiguration" DefaultDepth 16 Subsection "Display" Depth 16 Modes "1024x768" EndSubSection EndSection Section "DRI" Mode 0666 EndSection XF86Config-4 Debian ### BEGIN DEBCONF SECTION # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the # Debian X Configuration tool, using values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type "man XF86Config-4" at the shell prompt.) # # If you want your changes to this file preserved by dexconf, only make changes # before the "### BEGIN DEBCONF SECTION" line above, and/or after the # "### END DEBCONF SECTION" line below. # # To change things within the debconf section, run the command: # dpkg-reconfigure xserver-xfree86 # as root. Also see "How do I add custom sections to a dexconf-generated # XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz. Section "Files" FontPath "unix/:7100" # local font server # if the local font server has problems, we can fall back on these FontPath "/usr/lib/X11/fonts/misc" FontPath "/usr/lib/X11/fonts/cyrillic" FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/lib/X11/fonts/Type1" FontPath "/usr/lib/X11/fonts/Speedo" FontPath "/usr/lib/X11/fonts/100dpi" FontPath "/usr/lib/X11/fonts/75dpi" EndSection Section "Module" Load "GLcore" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "pex5" Load "record" Load "speedo" Load "type1" Load "vbe" Load "xie" # Load "xtt" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "it" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "ImPS/2" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "Trident Cyberblade i1" Driver "trident" VideoRam 8024 Option "sw_cursor" EndSection Section "Monitor" Identifier "Generic Monitor" HorizSync 30-60 VertRefresh 50-75 Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "Trident Cyberblade i1" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "Generic Mouse" EndSection Section "DRI" Mode 0666 EndSection ### END DEBCONF SECTION I'm working to use the special internet keys over the keyboard, so stay tuned! Please email me anything you want to add or modify into this page.

Torna su